Zoektermen
Zoektermen
The reusable Philips M1192A glove finger SpO₂ sensor is specifically designed for small fingers, and fits pediatric and small adult patients weighing 15-50 kg (33-110 lbs). Its durable, silicone form is manufactured without latex. It comes with a comprehensive warranty.* *Check with your local sales representative for the warranty details in your area.
| Product Category |
|
|---|---|
| Use with Non-Philips Healthcare Equipment |
|
| Use with Philips Healthcare Equipment |
|
| Product Type |
|
| CE Certified |
|
| Single-Patient Use OR Multi-Patient Use |
|
| Package Weight |
|
| Not manufactured with natural rubber latex |
|
| Packaging Unit |
|
| Minimum Shelf Life |
|
| Sterile OR Non-Sterile |
|
| Patient Application |
|
|---|---|
| Application Site |
|
| Adapter Cable Compatibility |
|
| Recommended Patient Weight |
|
| Cable Length |
|
| Product Category |
|
|---|---|
| Use with Non-Philips Healthcare Equipment |
|
| Patient Application |
|
|---|---|
| Application Site |
|
| Product Category |
|
|---|---|
| Use with Non-Philips Healthcare Equipment |
|
| Use with Philips Healthcare Equipment |
|
| Product Type |
|
| CE Certified |
|
| Single-Patient Use OR Multi-Patient Use |
|
| Package Weight |
|
| Not manufactured with natural rubber latex |
|
| Packaging Unit |
|
| Minimum Shelf Life |
|
| Sterile OR Non-Sterile |
|
| Patient Application |
|
|---|---|
| Application Site |
|
| Adapter Cable Compatibility |
|
| Recommended Patient Weight |
|
| Cable Length |
|
Product bekijken
Product bekijken
Product bekijken
Product bekijken
Product bekijken
Product bekijken
The Philips M1133A pulse oximetry sensor delivers continuous, noninvasive measurement of arterial oxygen saturation. Designed for multi-day, single-patient use, the M1133A wrap sensor is made of soft and flexible material and is manufactured without latex. It can be placed around the hand or foot to measure pulse oximetry on patients weighing less than 3 kg (6.6 lbs), as well as on the big toe or thumb of children from 10-20 kg (22-44 lbs), and on any finger except the thumb on patients over 40 kg (88 lbs).
Product bekijken
Manufactured without latex, comfortable and easy-to-clean, the Philips M1191B reusable SpO₂ glove sensor delivers high signal quality to provide continuous measurement of oxygen saturation. It is designed for use on the fingers of adults greater than 50 kg (110 lbs). With a comprehensive warranty, the M1191B sensor withstands the rigors of repeated use.
Product bekijken
M1191BL SpO₂ glove sensor features a long, 3-meter (118”) cable to accommodate a variety of bed/room configurations. It is designed for use on the fingers of adults greater than 50 kg (110 lbs). Manufactured without latex, durable and comfortable, the M1191BL is a cost-effective, versatile choice for continuous oxygen saturation measurement.
Product bekijken
The Philips M1191T SpO₂ glove sensor features a mid-point connector for efficient transfer from a bedside to a transport or mobile patient monitor. It is designed for use on the fingers of adults greater than 50 kg (110 lbs). This durable, comfortable sensor is manufactured without latex and supports cost-effective oxygen saturation measurement.
Product bekijken
Philips M1941A extension cable is an 8-pin to 8-pin input connector. It is 2.0 m (6.56 ft) long is compatible with a wide variety of Philips products. It is not manufactured with natural rubber latex.
Product bekijken
Designed for use with Philips SpO₂ monitors and sensors, the M1943A 8-pin adapter cable is 1.1 m (3.6 ft) in length and features a D-sub connector. It adapts 9-pin sensors to 8-pin sockets. It can be used with these sensors: M1131A, M1132A, M1133A, M1134A, M1140A, M1191T, M1192T, M1193T and M1196T.
Product bekijken